Materials Reference
Materials Reference
|
Materials
|
LU2-4 Cutting
|
LU2-4 Engraving
|
Remark
|
|
1.6mm Plywood Plate
|
300mm/min,S1000
Run 1 pass
|
10000mm/min,S1000
|
Darker Colors, Better Results.
|
|
2.8mm Plywood Plate
|
100mm/min,S1000
|
10000mm/min,S1000
|
Darker Colors, Better Results.
|
|
4mm Plywood Plate
|
100mm/min,S1000
|
10000mm/min,S1000
|
Darker Colors, Better Results.
|
|
7mm Pine board
|
100mm/min,S1000
Run 2 passes
|
10000mm/min,S1000
|
Darker Colors, Better Results.
|
|
9mm Pine board
|
100mm/min,S1000
Run 3 passes
|
10000mm/min,S1000
|
Darker Colors, Better Results.
|
|
0.1mm Colored A4 Paper
(Not White)
|
4000mm/min,S1000
Run 2 passes
|
9000mm/min,S350
|
The white paper is non-opaque, the result is not very good.
|
|
0.3mm Colored A4 Paper
(Not White)
|
1000mm/min,S1000
|
9000mm/min,S700
|
The white paper is non-opaque, the result is not very good.
|
|
250g Kraft Paper
|
1000mm/min,S1000
|
9000mm/min,S500
|
Darker Colors, Better Results.
|
|
3mm Paperboard
(Cardboard Box)
|
300mm/min,S1000
|
9000mm/min,S400
|
Darker Colors, Better Results.
|
|
0.7MM Leather
|
600mm/min,S1000
|
10000mm/min,S1000
|
Darker Colors, Better Results.
|
|
Non-woven fabrics
(0.5mm, Dark Color)
|
Cutting
2300mm/min,S1000
|
/
|
Cannot cut the white one, it's transparent in fact.
|
|
Some Plastic Sheet
(Dark Color)
|
/
|
3000mm/min,S600
|
Some plastic sheets may be melt.
|
|
5mm Acrylic
|
100mm/min,S1000
Run 3 passes
|
10000mm/min,S1000
|
Need coat the dark color paper onto the transparent Acrylic plate.
|
|
Tin Wire
|
Melting
|
/
|
Cannot engrave.
|
|
Cobblestone
|
/
|
100mm/min,S1000
|
Need coated with acrylic dye heat transfer film.
|
|
Ceramic
|
/
|
100mm/min,S1000
|
Need coated with acrylic dye heat transfer film.
|
|
Powder Coated Metal
Paint Sprayed Metal
|
/
|
10000mm/min,S1000
|
Engraved in the layer of powder coating.
|
|
Plated Metal
|
/
|
100mm/min,S1000
|
It's the surface color turned to be other color.
The Glossy finishing surface should be painted black by Marker Pen.
|
|
Anodized Aluminium
|
/
|
10000mm/min,S1000
|
|
|
Stainless Steel
|
/
|
100mm/min,S1000
|
|
|
Copper
|
/
|
Engraving
mm/min,S
|
|
| The results can be different even in the same material if they have different finishing or different colors, so you need to adjust the speed and power rate based on different objects. Also, please adjust the focal length to be the best, make the focal spot to be the smallest. The following materials can be difficult to engrave or cut directly: Glossy metal plate, Transparent materials, Reflecting materials, Some materials in white color or impervious to light, etc. For these materials you may need to use the marker pen to darken it to enable engraving. | |||
